Products
Dry Ice Pelletizer A55P-D3
The dry ice pelletizer A55P is driven by a powerful hydraulic unit and features instant push button start. All functions are controlled by an built-in PLC. Fully automatic control of oil temperature and dry ice snowing process guarantees continuous dry ice production without any supervision right from push button start.
To maximise the CO2 to dry ice conversion ratio the dry ice pelletizer can be connected to an "ASCO" revert gas recovery system. If a higher degree of automation is required, a production control system and an automatic filling system are available (see options below).
The dry ice pelletizer A55P is standardly equipped with an extruder plate for the production of dry ice pellets with a diameter of 3 mm (item no. 903506).
 |
| Item No. 903500 + 903504 |
|
 | Specifications
Total dimensions incl.
standard machine base(lxwxh): |
1150 x 600 x 1300 mm |
| Dimensions pelletizer (lxwxh): |
1150 x 600 x 700 mm |
Weight net incl. standard
machine base: |
approx. 141 kg (without hydraulic oil) |
| Production capacity: |
55 kg/h |
| Voltage: |
400 V / 50 Hz 3 Ph+E (other voltages on request) |
| Power consumption: |
1.6 kW |
| CO2 inlet connection: |
1/2" BSP female |
| CO2 source: |
CO2 Storage Tank, liquid phase (13 - 21 bar) |
| (On request, the pelletizer is also available without machine base.) | |
Options and Accessories to Dry Ice Pelletizer A55P-D3
 |
| Item No. 903511 |
|
| Spare parts kit
comprising of a selection of spares for approx. one to two years normal operation
|
 |
| Item No. 903508 |
|
| Extruder plate for 6 mm pellets
(used for cooling purposes)
|
 |
| Item No. 903507 |
|
| Extruder plate for 10 mm pellets
(used for cooling purposes)
|
 |
| Item No. 903505 |
|
| Extruder plate for 16 mm pellets
(used for cooling purposes)
|
 |
| Item No. 903640 |
|
| Production Control System PCS55
For a higher level of automation the dry ice pelletizer A55P can be combined with a production control system. Such a production control system allows the regulation of the production quantity or the production time, thus reducing the need for supervision even further, therefore keeping the requirement for respective personnal to an absolute minimum. With the optional production control system thedry ice pelletizer automatically stops when the set up production quantity is reached.
The production control system can also be added at a later stage to the pelletizer if required. |
Automatic Dry Ice Filling System
With the addition of an optional automatic filling system, the dry ice pelletizer A55P can be set to automatically fill all kinds of blasting machines or dry ice storage containers. The optional automatic filling system, with the appropriate control system, allows a pre-set low dry ice level to automatically start the dry ice pelletizer, with automatic stop at the pre-set high level. Such an automatic filling is the optimum solution wherever the automatic production of an exact dry ice quantity is needed.
The automatic filling system can also be added to the pelletizer at a later stage if required.
Versions and Options Automatic Filling:
|
Item No. 904605 |
Automatic dry ice filling system with a platform of 600 x 800 mm which is suitable for all ASCOJET and similar sized blasting units or smaller storage containers |
|
Item No. 904606 |
Automatic dry ice filling system with a platform of 1000 x 1000 mm which is for all larger blasting machines and storage containers |
| Item No. 903504 |
Standard machine base for the automatic filling of dry ice containers or of an ASCOJET 1502; increases the total height by 600 mm |
| Item No. 903510 |
Higher machine base for the automatic filling of an ASCOJET 2001CS; increases the total height by 800 mm |
Download Leaflet Dry Ice Pelletizer A55P
